Top A

Sehr geehrte Kundschaft

Leider müssen wir Ihnen mitteilen, dass wir aufgrund der Corona-Thematik bis auf weiteres nur eingeschränkt Kunden in unserer Werkstatt empfangen können. Wir bitten um Ihr Verständnis! 

  • Bitte warten Sie im Eingangsbereich bis ein Mitarbeiter Sie in Empfang nimmt. Handdesinfektionsmittel steht dort bereit. Beachten Sie die Markierung auf dem Boden und halten Sie einen Abstand von mind. 2m zu anderen Personen ein.
  • Wenn die Türe oder der Lift verschlossen ist, kann trotzdem jemand in der Werkstatt sein, nur der Empfang ist dann nicht besetzt. Bitte läuten sie oder rufen sie an: 061 681 42 33
  • Gerne nehmen wir weiterhin ihre Instrumente zur Reparatur/Service entgegen. Leider müssen Sie mit dem Abholen ein wenig mehr Geduld haben als normal, da die Instrumente erst einmal in Quarantäne müssen, bevor wir an ihnen arbeiten dürfen.
  • Das Testen der Neuinstrumente ist wieder möglich. Bitte machen Sie vorgängig einen Termin, damit wir uns optimal vorbereiten können. Unsere Mitarbeiter werden Sie anschliessend über das weitere Vorgehen informieren. 

ÖFFNUNGSZEITEN: Montag- Freitag, 10:00 bis 16:00 oder nach Vereinbarung.

Es dürfen sich zurzeit maximal 3 Kund*innen in unseren Verkäufsräumen aufhalten. Wir bitten Sie um Ihr Verständnis.

Gerne sind wir für Sie telefonisch oder per Email erreichbar.

Mit den besten Grüssen – Bleiben Sie gesund!

Ihr Egger-Team

Dear customers,

the time as come when we can see you all again! 

As of today we are open to visitors again, however we have to set some hopefully momentary restrictions. 

We have reduced opening hours: 10:00 to 16:00, from Monday until Friday.

However it is always possible to make an appointment outside these opening hours. We can receive up to three customers at the same time and therefore we highly recommend to make an appointment, in order to not let you down if you want to visit us spontanuously.
Our safety instructions regarding are presentend in German, English and French at our shop's entrance.

Best regards - stay healthy!

Your Egger team

3-hole Short Form Trumpet

Instrument in brass with bell after Johann Leonhard Ehe (Nuremberg 1664-1724) or Johann Wilhelm Haas (Nuremberg 1649-1723). Single crooks are also available. Unless otherwise noted key notations refer to a1 = 440 Hz.

 3loch

Friedemann Immer
Edward H. Tarr

Please download our flyer, available as a pdf-file.

flyer 3loch_small

TRUMPET with 4 traditional crooks

TRUMPET with 4 traditional crooks
Component PartCurrencyPrice
Corpus (including Baroque bell no. 1 or 2) CHF 1.455,-
Leadpipe for D, Db and C CHF 115,-
Leadpipe for C* CHF 115,-
Leadpipe for Cb (and Db-"T"-crook) CHF 115,-
Crook for D CHF 420,-
Crook for Db CHF 420,-
Crook for C CHF 420,-
Crook for Cb CHF 420,-

Standard model with 4 traditional crooks


* not necessarily required

CHF

3.480,-

 

TRUMPET with EGGER crooking set in 6 pitches

TRUMPET with EGGER crooking set in 6 pitches
Component PartCurrencyPrice
Corpus (including Baroque bell no. 1 or 2) CHF 1.455,-
Leadpipe for D at 440 and 430 Hz CHF 115,-
Leadpipe for C at 440 and 430 Hz CHF 115,-
Leadpipe for D and C at 415 Hz CHF 115,-
Basic crook for 3 pitches in D CHF 340,-
Attachment for D 440 Hz CHF 130,-
Attachment for D 430 Hz CHF 130,-
Attachment for D 415 Hz CHF 130,-
Basic crook for 3 pitches in C CHF 340,-
Attachment for C 440 Hz CHF 130,-
Attachment for C 430 Hz CHF 130,-
Attachment for C 415 Hz CHF 130,-

Standard model with set in 4 pitches


(C leadpipe excluded)

CHF

2.885,-

Standard model with set in 6 pitches


(C leadpipe included)

CHF

3.260,-

 

F-TRUMPET 3-HOLE MODEL, "Historic"

with bell after J. L. Ehe or J. W. Haas

Bell and yard are made of hammered sheet brass; the garland and ball are ornamented and engraved. The F trumpet can also be played with the bows of the normal 3-hole trumpet, in which case one should use the E bow for F 440 and the Eb bow for F 415. The tone-holes are however not in optimised positions.

 

F-TRUMPET 3-HOLE MODEL, "Historic"
Component PartCurrencyPrice
Corpus CHF 1.915,-
Crook in F, conical (special for F-trumpet), for F 440 CHF 546,-
Crook in E, conical (special for F-trumpet), for F 415 CHF 546,-
Crook in Eb, conical (special for F-trumpet), (D leadpipe required) CHF 546,-
Leadpipe Eb-sig, for F 440 and F 415 CHF 155,-

Instrument in F 440 and 415

CHF

3.162,-

 

BELL OPTIONS FOR 3-HOLE TRUMPET

The instruments can be fitted with any or all of the bells listed below. To calculate the price of a corpus with a renaissance bell, the price of the standard bell (850.-) is subtracted from the price of the corpus (1455.-); the price of the desired bell or bells is then added to the resulting difference (i.e. 605.-).

When using the bell exchanging mechanism, the chosen bell is fastened with a screw which allows for a quick exchange, even in a concert situation.

The ball (CHF 220.-) is not included in the price of single bells.

 

1. Baroque bell, 0,4 millimeter

 
Component PartCurrencyPrice
after Johann Leonhard Ehe II, ca. 0,4 mm, Nuremberg 1664-1724
Fine, well centered tone; good tonal penetration and projection; suitable for the top part of a trumpet ensemble, especially for processional fanfares.		 CHF 850,-

2. Baroque bell, 0,4 millimeter, Friedemann Immer model

 
Component PartCurrencyPrice
after Johann Wilhelm Haas, ca.0,4 mm, Nuremberg 1649-1723
Improved intonation, good response throughout all registers; suitable also for low pitch and Classical music; big sound; all-round bell, especially for big orchestral works.		 CHF 850,-

3. Baroque bell

 
Component PartCurrencyPrice
after Haas or Ehe, in sterling silver, CHF Price
on request

4. Renaissance bell

 
Component PartCurrencyPrice
ca. 0,3 mm, Renaissance decorations;
intimate, dark sound; distinguished by remarkably good intonation in the lower register; appropriate not only for Renaissance music, but also for the lowest part in a Baroque trumpet ensemble.		 CHF 900,-

Bell option "Historic"

 
Component PartCurrencyPrice
Bell option "Historic" ca. 0,35 mm, option for bell # 1, 2, and 4 "Historic" production techniques; made from hammered brass sheets; silver plating of garland and ball included; rich sound, easy legato playing and trills; more malleable sound; not very loud playing; requires slightly more energy for holding a tone.
Additional charge 		CHF 250,-

Bell option "MDC"

 
Component PartCurrencyPrice
Bell option "MDC" ca. 0,35 mm; option for bell no. 1 and 2 as well as F trumpet; made from hammered "Nuremberg brass" sheets; "Historic" production techniques, garland and ball silver plated; hand engraved garland with ample ornamentation; faster response, cleaner attacks, better cut through the orchestra even at lower volumes, historic sound and playing characteristics.
Additional charge, regular length CHF 885,-
Additional charge, for F trumpet CHF 655,-

Bell exchanger

 
Component PartCurrencyPrice
Bell exchanger CHF 140,-

 

ACCESSORIES FOR 3–HOLE BAROQUE TRUMPETS

Our search for quality and authenticity of sound even for the vented trumpet has resulted in a wide range of equipment which can be used either instead of, or in addition to the standard accessories. All parts are combinable, we will be happy to assist you.

"A" Quality
leadpipe receiver made from sheet metal; easier response and brighter sound in the high register.
"sig" geometry
sigmoidal geometry; improved slotting.
"T" Quality
seamless tubes, drawn in a slow process which results in a hard surface; easy response in the high register.
"K" crooks
Conical, improved response and intonation, especially on d'' and g', but also on g'' and low c. More historically authentic dimensions.
"H" Quality
tube soldered from hammered sheet metal; richer sound in the high register; excellent flexibility and quick response in all registers. -H- quality is only available for yard, conical bows and bells.
"MDC" Quality
made from "Nuremberg brass" sheets, -H- quality production methods, faster response, cleaner attacks, better cut through the orchestra even at lower volumes, only available for bells and yards.

Yards

Yards
Component PartCurrencyPrice
in standard quality CHF 315,-
in "H" quality CHF 465,-
in "MDC" quality CHF 745,-

 

Further traditional crooks

Further traditional crooks
Component PartCurrencyPrice
Crooks in "T"-quality, for E, Eb, D, Db, C, Cb, Bb (all 440) - each CHF 536,-
Crooks, conical, for E, Eb, D, Db, C, Cb, B, new - each CHF 546,-
Crooks, "H"-quality, conical, for D, Db, C, Cb, new - each CHF 690,-
Crook in 430 Hz, in E, Eb, D, C - each CHF 462,-
Crook in E (E-leadpipe required) CHF 420,-
Crook in Eb (Eb-leadpipe required) CHF 420,-
Crook in Bb 440 (Bb-leadpipe required) CHF 420,-
Crook in Bb 430 (D-leadpipe and leadpipe extension no. 2 required) CHF 462,-
Crook in A 440 (Cb-leadpipe and leadpipe extension no. 2 required) CHF 462,-
Crook in A 430 (D-leadpipe and leadpipe extension no. 3 required) CHF 462,-
2 additional vent holes CHF 50,-
Semitone extension of the bow for pitches lower than C CHF 180,-

 

EGGER crooking set in Bb

EGGER crooking set in Bb
Component PartCurrencyPrice
Basic crook for Bb 440, Bb 430, Bb 415 (=A 440) and A 430 Hz CHF 373,-
Attachment for Bb 440 (Bb-leadpipe required) CHF 135,-
Attachment for Bb 430 (D-leadpipe and leadpipe extension no. 2 required) CHF 135,-
Attachment for Bb 415 (Cb-leadpipe and leadpipe extension no.2 required) CHF 135,-
Attachment for A 430 (D-leadpipe and leadpipe extension no. 3 required) CHF 135,-

 

Crooks in tuning slide form

180 °-crooks, only with F-hole, for Classical music, not intended for high parts

Crooks in tuning slide form
Component PartCurrencyPrice
Crook in F 440, (Cb– leadpipe required), standard CHF 165,-
Crook in F 430, (Cb– leadpipe required), standard CHF 165,-
Crook in E 440, (Cb– leadpipe required), standard CHF 165,-
Crook in E 430, (Cb– leadpipe required), standard CHF 165,-
Crook in Eb 440, (Bb– leadpipe required), standard CHF 165,-
Crook in Eb 430, (Bb– leadpipe required), standard CHF 165,-

 

Leadpipes and leadpipe extensions

Leadpipes and leadpipe extensions
Component PartCurrencyPrice
Leadpipes in Eb, D, C, Cb, Bb, standard quality - each CHF 115,-
Leadpipes in D, C, Cb, Bb, „A“-quality - each CHF 155,-
Leadpipe in E, Eb, sig-quality - each CHF 155,-
Leadpipe-extension 1, straight, for Db no hole playing CHF 95,-
Leadpipe-extension 2, straight, for Bb 430, Bb 415 and Db no hole playing CHF 95,-
Leadpipe-extension 3, pig tail form, for A 430 CHF 270,-

 

No-hole version

so far only available in Db and Cb, standard-quality.

No-hole version
Component PartCurrencyPrice
Crook for Db (C-leadpipe and leadpipe extension no. 1 required) CHF 130,-
Crook for Cb (Cb–leadpipe and leadpipe extension no. 2 required) CHF 130,-
Yards, pair, for Db CHF 170,-
Yards, pair, for Cb CHF 170,-

 

Slide

Slide
Component PartCurrencyPrice
Slide in C (D-leadpipe for 440, C-leadpipe for 430, Bb-leadpipe for 415) CHF 1.000,-
For Bb 440: Semitone bow extension, pair (Cb leadpipe required) CHF 180,-
For Bb 430: Semitone bow extension, pair (Bb leadpipe required) CHF 180,-

 

Additional accessories and extras

Additional accessories and extras
Component PartCurrencyPrice
Mouthpiece adapter for modern mouthpiece CHF 35,-
Historical wooden mute CHF 130,-
Transportation crook CHF 50,-
Tone-hole screws CHF 3,50
Tone-hole screws with d’’ hole CHF 4,50
Gig Bag, medium, backpack fitting included CHF 370,-
Gig Bag, large, backpack fitting included CHF 390,-
Mouthpiece bag, holds 4 Mouthpieces, in black leather, with Egger Logo CHF 48,-
Mouthpiece bag, holds 1 Mouthpiece, black cloth with red lion (Egger logo) CHF 5,-
Leadpipe bag, holds 6 leadpipes CHF 40,-
Crook hooks CHF 7,-

August 2017